![]() ![]() ![]() You don't have to output all that extra data, I am just using it for illustration purposes, instead you can just narrow it down to the line containing the speed value: $ system_profiler SPUSBDataType | grep Seagate -A5 | grep Speedįor reference, USB speeds/specs are as follows: USB 1. It tells me it's got a speed of 480Mb/s which is a USB 2.0 device. Doing the same lookup for my Seagate FreeAgent Go USB disk, I get the following: system_profiler SPUSBDataType | grep Seagate -A5Ĭapacity: 500.11 GB (500,107,861,504 bytes) Looking at the "Speed" value, it tells me that it's a USB 1.1 device. To get it installed you need to run the following commands and its as easy as that. Well, you are in luck as there is a bash script available on Github that can be installed via Homebrew. This process works for similar IoT devices of mine and allows me to ssh into. For anyone that is using/has used Linux you are likely already familiar with lsusb, which is missing on macOS. An interface appears on ifconfig, and I can ssh into the device. ![]() See the device pop up under Devices->USB and lsusb. This may take a bit of extrapolation, but use the value from "Speed" in system_profilerįor example, looking at the Logitech USB receiver (for my mouse and second keyboard): $ system_profiler SPUSBDataType | grep Logitech -A5 My process for enabling on Linux for other IoT devices has been as follows: Enable the usb device under Devices->USB->USB Settings. which was used by libusb to show the devices on the USB bus, so that udev now has to be used if you want to see what USB devices you have with lsusb. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |